The RE50N/D-B delivers all of the outstanding performance of the industry-standard RE50B with the added benefit of a high-output neodymium capsule magnet. A top choice in broadcast television production where the additional gain of a neodymium capsule is well-suited for particular camera or recording device inputs.
The Electro-Voice® RE50N/D-B shock-mounted, dynamic omnidirectional microphone is an offspring of the legendary RE50 microphone. Built with the same rugged design as the RE50, the RE50N/D-B features a DynaDamp™ shock mount for greater ruggedness and isolation, and a new neodymium N/DYM® magnet structure to provide increased sensitivity required in exacting professional applications. Ideally suited for handheld broadcast and sound reinforcement applications, the RE50N/D-B has been built for superior isolation from mechanically induced noise. Handling noise, clothing noise, and even cord shock are isolated from the microphone element. Within the microphone’s machined-aluminum outercasing, a DynaDamp™ shock mount (manufactured using an advanced vibration-isolation material) surrounds the high-mass internal acoustic chamber and microphone element, resulting in a degree of isolation unprecedented in an omnidirectional dynamic microphone. The transducer is protected through a unique interlocking concept, making the RE50N/D-B practically indestructible with normal use. The transducer, fitted within a high-mass internal case, is shock-isolated within an attractive external case, therefore protecting the transducer from sudden shock. The microphone’s diaphragm permits a very smooth response over a wide frequency range, yet it withstands high humidity and temperature extremes, corrosive effects of salt air and severe mechanical shocks. The diaphragm is protected from dust and magnetic particles by a carefully designed integral windscreen and blast filter which also provides excellent protection from wind noise, excessive sibilance and annoying “P-popping.” The microphone’s Memraflex™grille is designed to bounce back to its original shape when bumped or dropped.
Electro-Voice RE50N/D-B Features
- Omnidirectional dynamic
- Higher output neodymium magnet structure
- Extremely low handling noise
- Four-stage filter blocks wind noise and pops
- Withstands high humidity, temperature extremes, and corrosive salt air
- RE50N/D-B Omni Dynamic Interview Microphone1
- Transducer TypeDynamic
- Polar PatternOmni
- Frequency Response (-3 dB)80 Hz - 13 kHz
- Wired/WirelessWired
- Mic TypeHandheld
- Diameter (Max)1.93" (49mm)
- Impedance, Low-Z balanced 150Ω
- Open Circuit Voltage 2.2mV/Pascal
- Power Requirement Passive
- Connector Type3-pin XLR
- Height7.76" (197mm)
- Weight Net9.49oz (269g)
