null Skip to main content
Clear-Com HXII-BP HelixNet 2-Channel Beltpack top
Clear-Com HXII-BP HelixNet 2-Channel Beltpack
$1,090.00

Clear-Com HXII-BP HelixNet 2-Channel Beltpack

SoundPro Item: 31846
MPN: HXII-BP-X4
$1,090.00


Add to Wish List

Account manager
Contact an Account Manager for your personalized price

The HelixNet HXII-BP beltpack is a two-channel intercom user station supported by the HMS-4X main station.

The beltpack provides two keysets assignable to any intercom channel and allows multiple channels to be uniquely stacked onto a keyset. The beltpack comes with a headset connection, independent Program Audio level control and a micro-USB Flasher connection to a third-party USB light.

Clear-Com HXII-BP Features

  • XLR-4M headset jack
  • Backlit keys with high visibility OLED displays for ease of use
  • 2 Keysets freely assignable to system channels
  • Stacked keys allow unique combination of channels
  • Independent Program Audio control
  • USB call signal flasher
  • Binaural controls on HXII-BP-X5
  • Powerline connection via XLR cable
  • Ethernet Network port with PoE
  • Easy to use CCM browser configuration
  • Fast front panel control and configuration
  • Plug-and-go with auto discovery
  • Central upgrades from main station
  • HXII-BP HelixNet 2-Channel Beltpack1
  • HelixNet System Hosts Arcadia:
    • Supports up to 64 HelixNet endpoints (HRM-4X, HKB-2X & HXII-BP) over Ethernet. Up to 24 Channels can be HelixNet Enabled using a Licensed Port for assignment to any HelixNet endpoints keyset. HMS-4X(3): Supports up to 64 endpoints (HRM-4X, HKB-2X, HBP-2X, HXII-BP, HLI-2W2, HLI-4W2, LQ port). User stations can connect via the 2 Powerlines (note power and data limits) or over Ethernet via optional HLI-ET2 module. HMS allows use of 12 channels which can be expanded to 24 using optional license.
  • Connectors
    • XLR Powerline(2): 3-pin XLR-F
    • LAN/PoE: RJ45 etherCON
    • Headset: 4-pin XLR-M (-X4) or 5-pin XLR-F (-X5)
    • USB: Micro AB
  • Microphone Pre-Amplifier
    • Headset Mic Impedance: 200Ω (Dynamic)
    • Headset Mic Voltage: 1.7V (Electret selectable)
    • Limiter: +23dB
    • Route to 4-wire output at 0dBu out:
    • Mic Gain: 60dB (Dynamic), 45dB (Electret)
    • Frequency Response: 300Hz – 10 kHz ± 3dB, contoured for intelligibility
    • Distortion: <0.2% THD @ 1kHz
    • Noise: <-55dBu (Dynamic), <-65dBu (Electret)
  • Headphone Amplifier
    • Load Impedance: >32Ω
    • Output Level: +12dBu before clipping
    • Sidetone: -12dB (selectable)
    • Route from a 4-wire input at 0dBu in:
    • Max Gain: 0dB
    • Frequency Response: 40Hz – 10kHz ±3dB
    • Distortion: <0.2% THD @ 1kHz
    • Noise: -65dBu
    • Headphone Limiter: 0dB (selectable)
  • Device Power
    • Voltage: 48V DC
    • Current (Max): 0.09A
    • Power (Max): 4W
    • BTU (Max): 13BTU/hr
    • This unit can be powered via:
      • PoE – Power over Ethernet(1):
        • IEEE 802.3af-2003 – Class 1
        • PSE: 4.0W DC max @ Power Source Req.
        • PD: 3.84W DC max @ Powered Device Draw
      • Powerline(2):
        • Input Voltage: ±29.5V DC
        • Input Current (Max): 0.13A
        • Powerline Utilization: HXII-BP = 1 beltpack
        • Note the maximum Powerline capacity of the HMS-4X(3)
      • Use HelixNet Cable Calculator to validate load and cable distance.
  • Environmental
    • 32° to +104°F (0° to +40°C)
    • 0 – 90% relative humidity
    • IP53 rated
  • Dimensions (WxHxD)3.9x5.3x1.7" (99x135x43mm)
  • Weight12.2oz (0.35kg)
  • Network
    • Specifications (Firmware Version 4.2+)
    • Network Protocols
      • Ethernet IPv4–Unicast Audio and Control
      • mDNS–Multicast Device Discovery
      • Layer 3 routable with mDNS function limitations
      • HTTP–Management
      • RTP–Audio Transport
      • WavPack–Audio Codec
    • Network Ports
      • Unicast:
        • Port 80 TCP–System Management
        • Port 6001 TCP–System Management
        • Port 6001 UDP–Audio Streams
    • Multicast:
      • Port 5353 UDP–mDNS, Names, Discovery, Linking
      • Optional for device names and linking
    • Network Parameters
      • HMS-4X(3) Endpoint Resource Use: 1 (-X4 variant)
      • HMS-4X(3) Endpoint Resource Use: 2 (-X5 for binaural)
    • Bandwidth:
      • 300 (max) kbps from each HXII-BP to HMS
      • 1200 (max) kbps from HMS to each endpoint
      • Network Jitter Tolerance: <= 128ms jitter buffer per audio stream receiver automatically adjusted to network performance
      • QoS Tags: DSCP=41, Assured Forwarding (AF)
      • Link-Local Default IP Address Range: 169.254.0.0/16
      • System Reserved IP Range: 10.0.0.0/8 for endpoints
  • Recommended Ethernet Switches
    • Managed Ethernet Switch – Layer 3
    • 100/1000 Base-T ports for endpoints
    • 1000 Base IP Trunks between switches
    • QoS configuration
    • Energy Efficient Ethernet bypass option
    • IGMP Snooping bypass option
    • Please refer to the Clear-Com HelixNet Network Guide for additional switch settings and network characteristics.</li>
  • Footnotes
    • (1) Ethernet to HMS-4X requires HLI-ET2
    • (2) Not available for Arcadia. Contact Clear-Com
    • (3) HMS-4X is a legacy product as of 2022

In The Box

Customer Reviews