null Skip to main content

Decimator DMON-16S 16-Channel MultiViewer

SoundPro Item: 35213
MPN: DMON-16S
$1,495.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

1 to 16 Channel MultiViewer with SDI and HDMI outputs for 3G/HD/SD and Custom Layouts.

The DMON-16S is a truly portable converter, that incorporates our new easy to use LCD and button control system. This gives you easy access to most of the amazing features without using complicated LED/button control, dip switches or having to carry around a computer to change a simple setting. Each window is independent of the others, allowing any 3G/HD/SD format of any frame rate to be displayed simultaneously with variable aspect ratios per window.

MultiViewer Features

  • Support both 3G level A and B on the input and output. Allowing conversion between 3G level A and B.
  • Low cost miniature (3G/HD/SD)-SDI 1 to 16 channel Multi-Viewer or 16 to 1 input multiplexer
  • Custom Layouts with various standard layouts
  • 16 Character UMD overlay per window with individual enables, custom positioning and size
  • 8 Channel Audio Metering overlay per window with individual enables, custom positioning and size
  • Safe Action and Safe Title overlay per window with individual enables and adjustment
  • Centre Cross overlay per window with individual enable
  • Audio ID overlay
  • Tallies can be applied to either Tally Boxes (Default), Outside Safe Action Area or Border
  • Tally boxes allows for up to 4 Tallies per window (Green, Red, Blue and Yellow)
  • Load and restore Custom Layouts
  • Fast switching between inputs using Full-Screen scaling
  • Selectable output format in both Full-Screen and Multi-Viewer mode
  • Low latency buffering for each input allowing non-synchronous inputs
  • Linked (3G/HD/SD)-SDI and HDMI outputs
  • 16 x (3G/HD/SD)-SDI inputs with auto detection (26 Formats supported in total)
  • Pass-Through mode allowing any of the 16 inputs to be selected and routed to both the (3G/HD/SD)-SDI and HDMI outputs
  • This unit also includes:
    • 1. 32 GPI on 37-pin D-SUB connector for Tallies and Remote Switching
    • 2. RS422/485 on 37-pin D-SUB connector for Dynamic UMD and Tallies via TSL protocol
    • 3. USB port for control and firmware updates
    • 4. Heavy duty metal box
    • 5. Metal Thread Locking DC Power Socket
    • 6. Power Supply, HDMI Cable and USB Cable

In The Box