Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound.
With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.
sE Electronics DM1 Features
- Designed for neutral, balanced sound quality
- The perfect way to boost the signal of a passive microphone
- Gain stays consistent regardless of connected load
- Provides significantly improved level to your mic preamp for proper gain staging
- Electronics DM1 Dynamite Active Inline Mic Preamp1
- sE Logo Sticker1
- User Manual with warranty card1
- Frequency Range 10 Hz - 120,000 Hz (-0.3 dB)
- Gain 28 dB (load 1k Ohms)
- Max output level (0.5% THD) 8.3 dBV (2.6 V)
- Output noise level 9 μV (JIS-A)
- Powering 48 Volts according to IEC 61938
- Electrical impedance 135 Ohms
- Recommended load impedance >1k Ohms
- Current consumption 3.0 mA
- Connectivity 3-pin male/female XLR connector
- Dimensions Diameter: 0.75 inches (19 mm), Length: 3.76 inches (95.5 mm)
- Weight 2.82 oz. (80 g)
