Easy to install, adjust, and customize to fit your needs, the AT2035PK Streaming / Podcasting Pack from Audio-Technica is ideal for content creators such as streamers and podcasters. This pack is comprised of an AT2035 microphone, pair of professional monitor headphones, and a studio boom arm, giving you the critical tools you need quickly and easily to assemble your setup and get right to work on whatever project you have planned.
The incredibly versatile AT2035 is a side-address, studio condenser microphone with a large diaphragm that delivers pristine audio detail, smooth, natural, and low noise, and a wide dynamic range. It features a switchable 80 Hz high-pass filter and 10 dB pad that enables it to easily handle high sound pressure levels, as well as a shock mount that helps attenuate noise, shock, and vibration. The AT2035 has an analog XLR output that connects to a digital converter or mixer.
Featuring advanced engineering quality, the ATH-M20x are professional monitoring headphones from Audio-Technica’s M-Series. These headphones include 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils are tuned for enhanced low-frequency performance. Their sound-isolating pads fit comfortably around the ear to allow you to enjoy long listening sessions—even when you’re surrounded by background noise.
Rounding out the AT2035PK Streaming / Podcasting Pack is a studio-caliber boom arm that securely clamps to any flat surface up to 2.2” (55mm) thick including desks or tables—making it easy to integrate with almost any home or studio setup. With full 360° rotation and spring-stabilized joints with thumbscrews, the boom arm can be perfectly positioned and adjusted for optimal mic placement in any recording setup. Its XLR (XLRF to XLRM) cable extends 10 feet (3 m) from the boom arm and is threaded internally for a clean appearance and unhindered operation.
Audio-Technica AT2035PK Features
- Microphone
- Large diaphragm for smooth, natural sound and low noise
- High SPL handling and wide dynamic range provide unmatched versatility
- Custom shock mount provides superior isolation
- Switchable 80 Hz high-pass filter and 10 dB pad
- Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Headphones
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
- Boom Arm
- Full 360° rotation
- Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
- Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
- Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom arm
- Internal cable management for clean desk appearance
- AT2035 cardioid condenser microphone1
- ATH-M20x professional monitor headphones1
- Studio Boom Arm threaded with a XLR cable1
- Microphones
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 20 Hz - 20 kHz
- Low-Frequency Roll-Off: 80 Hz, 12 dB/octave
- Sensitivity: -33 dBV/Pa (22.4 mV)
- Maximum Input Sound Level
- 148 dB SPL, 1 kHz at 1% T.H.D.
- 158 dB SPL, with 10 dB pad (nominal)
- Noise: 12 dB SPL
- Dynamic Range: 136 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio: 82 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11-52V DC, 3.8 mA typical
- Switches
- Flat, roll-off
- 10 dB pad (nominal)
- Connector: 3-Pin XLRM
- Dimensions: 170 mm (6.69") long, 52 mm (2.05") maximum body diameter
- Weight: 14.2 oz (403 g)
- ATH-M20x Headphones
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 – 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 6.7 oz (190 g), without cable and connector
- Cable: 9.8 feet (3 m), straight, left-side exit
