The P-924MK2 Power Amplifier from TOA delivers up to 240 watts (Direct)/220 watts (Transformer) of output power. The power amplifier has an input port to accept one plug-in module.
TOA P-924MK2 Features
- Power Amplifier
- Delivers up to 240W (direct) or 220W (transformer) output power
- Input port accepts one plug-in-module
- Includes volume control cover
- P-924MK2 Single-Channel 240W Power Amplifier1
- Volume control cover (YA-920)1
- TypePower amplifier
- Power RequirementAC mains, 120 V, 60 Hz
- Power Consumption120 V /3 A
- Output Power
- (D) 240 W RMS
- (T) 220 W RMS
- Power Band Width
- (D) 20 - 20,000 Hz, 0.5 % THD
- (T) 50 - 20,000 Hz, 0.5 % THD
- Frequency Response
- (D) 20 - 20,000 Hz, ±1 dB
- (T) 20 - 15,000 Hz, ±1 dB, (T) 20 - 20,000 Hz, +1 dB, -3 dB
- T.H.D0.01 % at 1 kHz, rated output
- Inputs
- One Input Port: Port accepts any input module exept T-01.
- One Direct Input
- ※ Use of direct input prohibits use of modular input port
- Input Sensitivity /Impedance
- Input Port: 100 mV or 1000 mV (switchable)/10 kΩ
- Direct Input: 100 mV or 1000 mV (switchable)/10 kΩ
- Outputs(T)=Transformer (D)=Direct
- Main (T): 8 Ω, 25 and 70 volts, balanced
- Main (D): 4 Ω, unbalanced
- Output Regulation(1kHz)
- (D) Less than 0.5 dB, no load to full load
- (T) Less than 1.0 dB, no load to full load
- S/N Ratio(Band Pass 20-20,000Hz)
- Input level switch in 0 dBV (1000 mV) position: 108 dB
- Input level switch in -20 dBV (100 mV) position: 90 dB
- Controls
- 1 Input gain control 1 Input level switch
- 1 Power ON/OFF switch 1 Low-Cut switch
- Indicators1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED
- ProtectionSelf-protection, with 2AC fuses and 2DC fuses (inside)
- Connectors
- Input: Card-edge connector and screw-terminal strip
- Output: Screw-terminal strip
- AC outlet: 3-pin grounding type
- AC power cord/plug: SJT, 3-prong type
- Temperature Range-10 ℃ to +60 ℃
- FinishBlack
- Dimensions420 (W) × 151.3 (H) × 334.2 (D) mm
- Weight19.5 kg
