null Skip to main content
Allen & Heath dLive DX32 Digital Expander
Allen & Heath dLive DX32 Digital Expander
$3,999.00

Allen & Heath dLive DX32 Digital Expander

(No reviews yet)
SoundPro Item: 69248
MPN: DX-32 EXPANDER
$3,999.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The ideal addition to any installed sound system, the dLive DX32 Digital Expander from Allen & Heath adds remote, modular I/O to a dLive, AHM-64, Avantis, or SQ system, giving you easy scalability to expand your connectivity to fit the size of the venue. The DX32 provides 4x8 channel slots for customizable inputs and outputs for any combination of analog or digital equipment.

The DX32 carries up to 32x32 channels of uncompressed audio (at 96kHz) and control data. It also features automatic firmware updates when the system powers up, making corrections to firmware mismatches if they are detected—and thus making your job that much easier.

Use a singled Cat5e cable to connect the expander to the dLive Surface, MixRack, SQ SLink port, Avantis SLink port, AHM-64 SLink port, or DX Hub via a secure etherCON port (all external equipment sold separately). Need redundancy for confident connection? Use a pair of cables to connect compatible dLive hardware (dLive S Class control surface or mix engine over Fast Ethernet) to the DX32’s two Ethercon ports.

The DX32 is a rack-mountable digital expander that is designed to be easily integrated into your installed sound system. For situations that benefit from portability, it also comes with plastic feet so you can place it on a shelf or floor without worrying that it will get banged up.

This digital expander’s power supply is modular, accepting AC mains voltages of 100~240V, 50/60 Hz, 300W max via an earthed 3-pin IEC male connector. A rocker switch near the mains inlet is built-in to help isolate connected mixers from the incoming mains supply.

Allen & Heath dLive DX32 Features

  • 4x 8ch modular design
  • Redundant, hot swappable power supply
  • Dual redundant Cat5 link to Surface or MixRack
  • Rack-mounted or shelf / floor operation
  • dLive DX32 Digital Expander1
  • Three Year Warranty1
  • Inputs
    • Mic/Line XLR Inputs: Balanced XLR, +48V phantom power
    • Mic/Line Preamp: Fully recallable
    • Input Sensitivity: -60 to +15dBu
    • Analogue Gain: +5 to +60dB, 1dB steps
    • Pad: -20dB Active PAD
    • Maximum Input Level: +30dBu (PAD in)
    • Input Impedance: >4kΩ (Pad out), >10kΩ (Pad in)
    • Mic EIN: -127dB with 150Ω source
    • Phantom Power Indication: Per socket, internal or external phantom power sensing, triggered at 24V
  • Outputs
    • Analogue XLR Outputs: Balanced, Relay protected
    • Output Impedance: <75Ω
    • Nominal Output: +4dBu = 0dB meter reading
    • Maximum Output Level: +22dBu
    • Residual Output Noise:
      • -92dBu (muted, 20-20kHz)
      • 90dBu (muted, 20-40kHz)
  • System
    • Sampling Rate
      • ADC: 24-bit Delta-Sigma
      • DAC: 24-bit Delta-Sigma
    • Latency: + 8 samples, DX32 to Mixrack (DX hop)
    • System Latency:
      • 0.7 ms (MixRack XLR in to XLR out, Input to Mix)
      • + 5 samples, Surface to Mixrack (GigaACE hop)
  • Power
    • Mains Voltage Operating Range: 100-240V AC, 50/60Hz
    • Mains Power Consumption
      • 300W max (MPS16 V1 300W)*
      • 250W max (MPS16 V2 250W)*
      • *MPS16 power consumption is printed under AC inlet Operating
    • Operating Temperature Range
      • Fitted with:
        • MPS16 V1 300w 0°C to 35°C (32°F to 95°F)
        • MPS16 V2 250w 0°C to 40°C (32°F to 104°F)
  • Dimensions and Weights (W x D x H)433 x 290 x 177 mm, 23 lbs (10.5kg)

In The Box

Customer Reviews