null Skip to main content
Clear-Com FSII-BP24 FreeSpeak II 2.4GHz Wireless Beltpack
Clear-Com FSII-BP24 FreeSpeak II 2.4GHz Wireless Beltpack
$1,990.00

Clear-Com FSII-BP24 FreeSpeak II 2.4GHz Wireless Beltpack

(No reviews yet)
SoundPro Item: 71270
MPN: FSII-BP24-X4
$1,990.00

Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The FSII-BP24 is a rugged, water-resistant beltpack that operates in the ISM license-free 2.4GHz frequency range. Featuring the "Clear-Com Sound", the FSII-BP24 has high audio bandwidth for superior intelligibility and listening comfort.

Clear-Com FSII-BP24 Features

  • Operates in the 2.4GHz frequency band
  • Frequency Hopping Spread Spectrum (FHSS)
  • Simple 2-channel partyline operation to 5-channel intercom on the same beltpack
  • 7kHz audio wide band
  • "Listen Again" message replay
  • Typical indoor range: 300 ft (90m), outdoor range: 800 ft (240m)
  • Over-the-air beltpack registration
  • 18+ hour battery life or USB port for continuous operation
  • IP-53 rating for wet and dusty conditions
  • Built-in flashlight
  • FSII-BP24 FreeSpeak II 2.4GHz Wireless Beltpack1
  • Audio
    • Audio Bandwidth: 200Hz-7.5KHz
    • No. of Full-Duplex Audio Paths: Up to 5 with individual level control (2 dedicated rotaries, 3 with menu), 2 controls and a main volume
    • Mode of Operation: Full duplex on all routes
    • Level/Talk Controls: 4 pushbuttons, a reply button and 2 rotary controls
    • Enter/Answer-Back Button: 1
  • Radio
    • Frequency Spectrum: 2.400-2.483MHz for EU and US cellular auto roaming technology
    • Modulation: GFSK, TDMA frame 10ms full and long slot
    • Output power: (EU) 18-22dBm, (US) 18-20dBm
    • Range: Typical indoor range 300ft (90m), outdoor range 800ft (240m)
    • Battery: Li-Ion or 3 AA alkaline cells
    • Battery Charging: Drop-in charger (AC60) or local USB
    • Battery Life: 18+ hours with Li-Ion; 9 hours with 3 x Alkaline AA cells
  • Connectors
    • Headset Connector: 4-pin male, Clear-Com standard, options for 5-pin female and 7-pin male with PTT
    • Headset Voltage: Maximum of ~+8dBu as set by firmware
    • Microphone Type: Electret and Dynamic, selectable in beltpack menu
    • Microphone Voltage: Electret Mic:-45dBu (additional 2.5V DC bias voltage positive on Pin 2 and negative on Pin 1 via a 1k resistor).
    • Headset Limiter: Selectable from beltpack menu
  • Environmental
    • IP53 water and dust resistance
    • Operating: 32º-125ºF (0º-50ºC)
    • Storage: 32º-150ºF (0º-70ºC)
    • Humidity: Between 20% and 90%, Non-Condensing
  • Dimensions (HxWxD)3.75x5x1.5" (97x130x45mm), tapered design at largest points
  • Weight9 oz (0.25kg) including batteries

In The Box

Videos Hide Videos Show Videos

Customer Reviews