![Crown CDi 2|600 2-Channel 70V Power Amplifier](https://cdn11.bigcommerce.com/s-mmffu4sg6a/images/stencil/50x50/products/3716/25211/Crown_CDi2_600_Front__00706.1628103902.jpg?c=1")
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from Crown's flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|600 offers streamlined functionality to work in almost any large sized installation such as cinema, houses of worship, hotels, cruise lines, and more. Designed for ease-of-use in a variety of applications, the 2|600 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
Crown CDi 2|600 Features
- DriveCore technology
- Network control and monitoring
- DSP capabilities include input router, input and output delay, input and output parametric EQ, crossover, levelMAX limiter
- Direct drive 70/100Vrms output
- GPIO/aux port
- CDi 2|600 power amplifier1
- Sensitivity0.7V RMS (for full rated power at 8 ohms)
- Rated power output600W (per channel @ 4 ohms)
- Analog input signal to noise ratio> 104dB (ref. rated power, 100V, 20Hz - 20kHz; at 8 ohms)
- THD0.35% (full rated power, 20 Hz - 20 kHz)
- Damping factor> 1000 (20 Hz to 100 Hz)
- Frequency response+/-0.5dB (8Ω, 20 Hz - 20 kHz)
- Crosstalk> 80dB (below rated power, 20 Hz to 1 kHz)
- Input impedance (nominal)20 kΩ balanced, 10 kΩ unblanced
- Power supply connectorstandard IEC type 320 inlet for detachable connector 100 – 240V~
- Dimensions19" x 3.5" x 12.25"
- Weight14.56 pounds (6.6 kg)
