Your Cart
Close
Listen Technologies
SoundPro Item:
72712
MPN:
LS-90-01

Listen Technologies LS-90-01 ListenIR iDSP Level I System

MSRP: $1,610.00
$1,449.00
Save $161.00
Sales & Expert Advice
Have Questions? Talk to a SoundPro Expert!

Need System Design Support?

Securely transmit assistive listening audio and ensure compliance for your venue with the LS-90-0 ListenIR iDSP Level I System. The pre-configured system includes everything you need to meet the needs of a small or mid-size venue up to 50 seats, including boardrooms, theaters, training venues, classrooms, and more.

Each LS-90-0 system comes complete with one of our LT-84 Transmitter/Radiator combos for clear and secure line-of-sight audio transmission, along with our LR-4200-IR receivers and LA-423 4-port charger.

Simple to set up and cost effective, the LS-90-0 from Listen Technologies offers better coverage than similar systems at an affordable price.

Listen Technologies LS-90-0 ListenIR iDSP Level I Features

  • Pre-configured infrared system comes with everything you need to begin offering secure, high-quality assistive listening in your venue
  • Provides outstanding coverage up to 2,787 m2 (30,000 ft2)
  • Ideal for small or medium-sized venues up to 50 seats
  • Simple to set up and easy to use
  • Crystal clear audio performance for all listeners
  • Integrated neck loops/lanyards provide compatibility with T-coil-equipped devices
  • Designed for single-channel applications
  • LT-84-01 ListenIR Transmitter/Radiator Combo1
  • LR-4200-IR Intelligent DSP IR Receiver2
  • LA-430 Intelligent Ear Phone/Neck Loop Lanyard2
  • LA-401 Universal Ear Speaker2
  • LA-423 4-Port USB Charger1
  • LA-304 Assistive Listening Notification Signage Kit1
  • LT-84 Transmitter/Radiator
    • Audio
      • Frequency Response: 20 Hz - 20 kHz (+/- 1 dB) Line Input, 63 Hz - 15 kHz (+/- 3 dB) System Specification (wireless end-to-end with LR-4200)
      • Signal-to-Noise Ratio: > 70 dB (SNR) Line Input, > 60 dB (SNR) System Specification (wireless end-to-end with LR-4200)
      • Microphone Input: Two (2) 3.5 mm (0.14 in.) Tip/Sleeve connector, -30 dBu nominal input, +14 dB headroom, impedance 4.4k Ohms, 5 VDC bias supply
      • Total Harmonic Distortion: < 0.1% (THD) Line Input, < 2% (THD) System Specification (wireless end-to-end with LR-4200)
      • Unbalanced Line Input: Stereo/Mono Input. Two (2) Dual (RCA) Phono connectors, unbalanced, -10 dBu nominal input, +14 dB headroom, impedance 10k Ohms
      • Balanced Line Input: Mono Input. Two (2) Phoenix Type connector, balanced, + 4 dBu nominal input, +14 dB headroom, impedance 100k Ohms
    • Controls
      • Power Switch: Three (3) position switch - Power OFF, Power ON-Indicator Lights OFF, Power ON-Indicator Lights ON
      • Carrier Frequency Selection: Two (2), four (4) position rotary switches (2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz)
      • Level Control Knob: Two (2) audio taper rotary potentiometer, counter-clockwise decreases input mix level, clockwise increases input mix level
    • Indicators
      • Power Supply LED: Green LED on in-line power supply indicates AC power is applied
      • Audio Level Indicators: Two (2) Green LEDs, two (2) Red LEDs, Green LED indicates Audio presence and Red LED indicates peaks in the audio
      • RJ-45 Amber LED: Solid Amber indicates carrier is present and IR is being transmitted
      • RJ-45 Green LED: Solid Green indicates power is applied to unit, flashing indicates unit has entered power save mode
    • RF
      • Carrier Frequencies: 2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz, Selectable
      • Number of Channels: Two (2) channels, Selectable carrier frequency
      • Frequency Accuracy: +/- .005% stability 0 to 50 °C
      • Transmitter Stability: 50 PPM
      • Modulation: FM Wideband, ±50kHz deviation max, 50 ?S pre-emphasis
      • Power Save Mode: Carrier will shut off when no audio is present for 15 minutes on both channels to preserve radiator life
      • Expansion Link Output: Two (2) RJ-45 connectors - Provides RF Signal and Power, CAT-5e cable 24 AWG, 100 ft. maximum cable length, two (2) LA-141s per output connector
    • IR
      • Coverage Area: 2,787 m² (30,000 ft²) single channel with LR-4200-IR/LR-5200-IR receivers or 697 m² (7,500 ft²) single channel with LR-42/LR-44 receivers
      • IR Emitter Power: 1.49W
    • Power
      • Power Supply Input: 100-240 VAC, 50-60 Hz
      • Power Supply Output: 12 VDC, 4 A, 48 W
      • Power Supply Connector: 2.5 mm ID barrel connector, center positive
      • Power Output: Two (2) RJ-45 connectors. providing Power and RF signal for up to two (2) LA-141 expansion radiators on each output
      • Power Supply Type: In-line switching mode power supply, Listen part number LA-210
      • Power Supply Line Cord: IEC line cord, North America Type B (LT-84-01), Asia and UK Type G (LT-84-02), Euro Type F (LT-84-03), Australia Type I (LT-84-04)
    • Physical
      • Color: Black with White Silk Screening
      • Unit Weight with Power Supply: 1.8 lbs (0.8 kg)
      • Shipping Weight: 3.4 lbs (1.54 kg)
      • Mounting: Can be mounted on a wall, ceiling, or table with provided hardware (screws and hollow wall anchors not provided). Optional LA-347 Wall Box Mounting Plate is available for mounting to a standard single gang electrical box.
      • Dimensions (HxWxD): 1.5x10.7x4.1" (3.81x27.2x10.5cm)
      • Unit Weight: 0.8 lbs (0.4 kg)
    • Environmental
      • Temperature - Operation: 14°F (-10°C) to +104°F (40°C)
      • Temperature - Storage: -4°F (-20°C) to +122°F (50°C)
      • Relative Humidity: 0 to 95% relative humidity, non-condensing
    • Compliance
      • Standards: FCC part 15, ICS-03, CE, UL, CUL, C-Tick, CCC, PSE, KC, GS, RoHS, WEEE
      • Power Supply Compliance Marks: CUL, UL, CE, CCC, C-Tick, KC, PSE, GS, FCC, RoHS
  • LR-4200-IR Intelligent DSP IR Receiver
    • Audio
      • System Distortion: < 2% total harmonic distortion (THD) at 80% deviation
      • Audio Output Jacks: Two (2) 3.5 mm (0.14") connectors, unbalanced, 0 dBu nominal output level, 16 mW maximum, impedance 32 ohm, accepts mono or stereo phone plug or LA-430 Intelligent Ear Phone/Neck Loop Lanyard
      • System Frequency Response: 63 Hz - 15 kHz (±3 dB)
      • System Signal to Noise Ratio: > 60 dB
    • Controls
      • User Controls: Power on/off and volume up/down
      • Programming: Via software and USB port, Auto Seek, Jack Sense, Squelch, Auto Power, Auto Off, Stereo, Brightness, Channel Name
      • Set-up Controls: Press and hold up/down volume buttons for 5 seconds to enterchannel adjust, use up/down to select channel
    • Indicators
      • Display: OLED - Channel designation, battery level, unit number, charging status, volume status
      • LED: Flashes when batteries are low or to indicate charging, solid when fully charged
    • RF
      • Carrier Frequencies: 2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz
      • Number of Channels: Four (4) selectable channels
      • Frequency Accuracy: ± .005% stability 32 to 122 ºF (0 to 50 ºC)
      • Modulation: FM Wideband, ±50 kHz deviation max, 50 uS de-emphasis
    • IR
      • Coverage Area: 30,000 ft² (2787 m²) single channel with LT-84/LA-141 or 40,000 ft² (3716 m²) single channel with LT-82/LA-140
      • Squelch: Programmable in 20 steps, automatic on loss of IR signal
      • Power Save Mode: Turns unit off after a specified time of no IR signal, default is 30 minutes
      • Sensitivity: Better than one (1) nW/cm2 @40 dB SNR
    • Power
      • Power Supply: Micro USB connector, 5 V, 500 mA
      • Battery Type: Lithium Ion
      • Battery Life: 8 Hours of typical use
      • Battery Charging Time: Fully charged in 2.5 Hours
    • Physical
      • Color: Flat Black
      • Unit Weight with Batteries: 2.8 oz. (79.4 g)
      • Shipping Weight: 3.5 oz. (99.2 g) with a 1 lbs. (0.45 kg) minimum
      • Dimensions (HxWxD): 3.75x2x0.64" (9.6x5x1.7cm)
      • Unit Weight: 1.9 oz. (53.9g)
      • Dimensions with Belt Clip: 3.75x2x0.8" (9.6x5x2.1cm)
    • Environmental
      • Temperature - Operation: 14 to 104ºF (-10 to 40ºC)
      • Temperature - Storage: (-)4 to 122°F (-20 to 50°C)
      • Relative Humidity: 0 to 95% relative humidity, non-condensing
    • Compliance Standards: FCC Part 15, ICS-03, CE, RoHS, WEEE, ADA 706, CBC 11B-706
  • LA-430 Integrated Neck Loop
    • Interconnections
      • Connection to Receiver: Male 3.5 mm (TRRS) to Male 3.5 mm (TRRS)
      • Connection to Short Ear Phone: Female 3.5 mm (TRS)
    • Loop
      • Neck Loop Field Strength: 400 mA/m (+/- 3dB)
      • Neck Loop Frequency Response: 100Hz to 5kHz (+/- 3 dB ref 1kHz)
    • Physical
      • Color: Black
      • Shipping Weight: 1 lbs. (454 g)
      • Cord Length: 29" (74 cm)
      • Unit Weight: 1.5 oz. (43 g)
    • Compliance Standards: RoHS, IEC60118-4
  • LA-401 Universal Ear Speaker
    • Audio
      • Frequency Response: 20 Hz - 20 kHz
      • Impedance: 32 ohm +/- 15% @ 1 kHz
      • Input Sensitivity: 115 dB +/- 4dB @ 1 kHz, 1 mW
      • Rated Power Input: 50 mW
      • Max Power Input: 100 mW
    • Interconnections: Male 3.5 mm (TRS)
    • Physical
      • Color: Dark Gray
      • Shipping Weight: 1 lbs (454g)
      • Cable Length: 13" (33cm), extension cable is 28" (71 cm)
      • Unit Weight: 0.4 oz (11g)
    • Compliance Standards: RoHS
  • LA-423 USB Charger
    • Power
      • Power Supply Input: 100-240 V, 50-60 Hz, 0.5 A
      • Power Supply Output: 5.0 VDC, 4.2 A
    • Physical
      • Color: Black
      • Shipping Weight: 1 lbs. (454g)
      • Cable Length: 36" (92cm)
      • Cable Type: 4 - USB to Micro USB Cables (LA-422)
      • Dimensions (HxWxD): 2.44x2.9x1.13" (62x74x29mm)
      • Unit Weight: 7.8 oz (221g)
    • Compliance Standards: UL, FCC, RoHS, CE. RCM
  • LA-304 Signage Kit
    • Shipping Weight: 1 lb (0.5 kg)
    • Weight 6 oz. (170 g)
    • Dimensions Hard Plaque: 7x10” (178x254 mm); Soft Cling: 7x10” (178x254 mm)

What’s in the Box?

same day shipping

SAME DAY SHIPPINGon in stock items

advice

EXPERT ADVICEfrom knowledgeable Account Managers

easy payments

EASY PAYMENTSwith financing available from Affirm

free shipping

FREE SHIPPINGon orders over $100

gear you need

GEAR YOU NEEDfrom 400+ Brands

Reviews

Your Recently Viewed

Get A Quote

Close

We are here to help with system design support, technical insights, and custom pricing. Send us a message, we'll respond within four business hours!

Why Choose SoundPro?

Since 1973, SoundPro has been a trusted source for audio, video, and lighting gear. Whether you're starting your AVL journey or are a seasoned professional, we're here to help you every step of the way.

learn more
Certified Account Managers

Certified Account Managers

Our Account Managers, with 16+ industry certifications, are ready to find your solution.

Personalized Pricing

Personalized Pricing

We know every project is unique. Get a personalized quote anytime you need it.

Fast Shipping

Fast Shipping

In stock items ship same day if ordered by 4PM CST.

Accountability from Real People

Accountability from Real People

We aim for a smooth, transparent experience by setting and sticking to clear expectations.

Easy Payments

Easy Payments

We accept all major credit cards, PayPal credit and also offer financing through Affirm.

Sales & Expert Advice

Sales & Expert Advice

Our team of Certified Account Managers are deeply passionate about this industry and have hands-on experience with AVL solutions for houses of worship, live productions, integration and more.

Customer Service Hours: 9am - 5pm CST