The TTP 4-A point source speaker module delivers top-quality sound for highly demanding events indoors or outdoors on small to medium-sized areas. Its design provides the audio engineer with the best tonal balance and intelligibility with an unobtrusive and adaptable footprint. It is the preferred sound set-up for stacked and flown systems when a controlled dispersion is required. With all the advantages of TT+ technology, such as coherent directivity, power, and precision, it’s designed for professional applications.
RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. A network user can change level, delay, EQ (linear phase FiR as well) and other settings, including advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.
RCF TTP 4-A Features
- 135 dB max SPL
- 60° x 25° coverage
- LF 2 x 10’’ neodymium woofer, 3.0” voice coil
- HF 1.5” Nd comp. driver 4.0” voice coil
- 2 x Class-D amplifiers, 1600 Watt RMS total power
- 45 – 20.000 Hz frequency range
- RDNet on board
- FiRPHASE 0° linear phase
- TTP 4-A dual 10-inch powered speaker1
- Frequency Response45Hz - 20,000Hz
- Max. SPL (@ 1m)135 dB
- Coverage Angle (HxV)60° x 25°
- Transducers
- Compression Driver: 1 x 1.5'' neo, 4.0'' v.c
- Woofer: 2 x 10'' neo, 3.0'' v.c
- Input / Output Section
- Input Signal: bal/unbal
- Input Connectors: XLR, RDNet Ethercon
- Output Connectors: XLR, RDNet Ethercon
- Input Sensitivity: +4 dBu
- Processor Section
- Crossover Frequencies: 900 Hz
- Protections: Thermal, RMS
- Limiter: Fast Limiter
- Controls: selectable preset, volume, delay
- RDNet: yes
- Power Section
- Total Power: 3200 W Peak, 1600 W RMS
- High Frequencies: 1200 W Peak, 600 W RMS
- Low Frequencies: 2000 W Peak, 1000 W RMS
- Cooling: convection
- Connections: Powercon IN/OUT
- Physical Specifications
- Cabinet / Case Material: Baltic birch plywood
- Hardware: Array fittings, 2xM10 on the top, 2xM8 on each side
- Handles: 2 side, 2 rear
- Pole Mount / Cap: yes
- Grille: steel
- Dimensions (HxWxD): 32.48" x 12.44" x 14.53"
- Weight: 67.02 pounds
