VXH series pendant speakers are an ideal choice for open-structure or sloped ceilings, adding versatility for a variety of environments and sonic needs.
Two models are available: the wide-dispersion 6.5-inch VXH6 for use where the speakers are to be suspended at a relatively low position, and the high-power 8-inch VXH8 with narrower dispersion for higher suspension positions. You can select or mix and match models to achieve the best sound and coverage in any application.
Yamaha VXH6 Features
- Wide dispersion (120°) and 300W power handling
- Engineered for optimum BGM and voice reproduction
- Pendant speaker suitable for high, open structure or sloped ceilings
- Direct support for low-impedance or high-impedance connections
- Paintable grilles with magnetic catches
- 2 x 6m steel wire cables by Gripple
- Black and white versions available
- 5.7 kg (12.6 lbs), Ø340 x D368 mm (Ø13-3/8” D14-1/2”)
- Single unit package
- VXH6 6.5" Pendant Speaker1
- Gripple Kit 1
- Euro Block (4 pin) 1
- Cushion Seal 1
- Back Cover Set 1
- Owner’s Manual 1
- GRIPPLE Kit Installation Guide 1
- Speaker TypeCoaxial 2 way, Bass reflex type
- Frequency Range (-10dB) 57 Hz – 20 kHz (Full-space:4π)
- Nominal Coverage120° conical (Full-space:4π)
- Crossover Frequencies3kHz
- Components
- LF: 6.5” (16 cm) Cone
- HF: 1” (2.5) Soft Dome
- Power Rating
- NOISE: 75W
- PGM: 150W
- PEAK: 300W
- Nominal Impedance8Ω
- Transformer Taps
- 100V: 60W, 30W, 15W
- 70V: 60W, 30W, 15W, 7.5W
- SPL
- Sensitivity (1W; 1m on axis): 93 dB (Full-space:4π)
- Peak (Calculated): 118 dB (Calculated, 1 m)
- I/O ConnectorsEuroblock (4 pin) × 1 (input: +/-, loop-thru: +/-): Min. wire size AWG 24 (0.2 sq), Max. wire size AWG 12 (3.5 sq)
- Protection Circuit (Load Protection)Full-range power limiting to protect network and transducers
- FinishVXH6B Black powder coating (approximate value: Munsell N3), VXH6W White powder coating (approximate value: Munsell N9.3)
- Dimensions
- Diameter: Ø341 mm (13 - 3/8")
- D: 379 mm (14 - 1/2")
- Net Weight5.7 kg
- Dust and Water ResistantIP45 (when waterproofing the cover hole)
- CertificationUL1480A, NFPA70, CE, RoHS
