null Skip to main content
DPA ST2011A Stereo Pair with Case
DPA ST2011A Cardioid Condenser Microphones (Stereo Pair)

DPA ST2011A Cardioid Condenser Microphones (Stereo Pair)

(No reviews yet)
SoundPro Item: 65311
MPN: ST2011A
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

A complete stereo pair; two handpicked cardioid condenser microphones, selected on sensitivity within ±1.5 dB. Makes several stereo principles like XY and ORTF easy to obtain.

These mics are acclaimed for their close-miking excellence and hi-SPL handling. Optimized for onstage use, it has been used on many stages as well as recording sessions. They exhibit a previously unheard blend of clarity, richness and dynamic range. The off-axis response is linear but in a smaller frequency bandwidth. This makes stage separation and gain-to-feedback higher. The mic level is easier to control.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of the microphone/accessory inlays.

DPA ST2011A Features

  • Sensitivity-selected pair
  • Blends clarity, richness and dynamics
  • Twin diaphragm capsule and interference tube technologies
  • Superb stage separation and level control
  • Low-profile mounting options
  • Modular flexibility
  • Peli Case transportation and protection
  • 2011A twin diaphragm cardioid microphones2
  • Clips2
  • Windscreens2
  • Carry case1
  • Transducer TypeCondenser
  • Polar PatternCardioid
  • Frequency Response20 Hz - 20 kHz
  • Rated Output Impedance200 ohms
  • Sensitivity, Nominal ±2 dB at 1 kHz10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent Noise Level, A-Weightedtyp. 20 dB(A) re. 20 µPa (max. 23 dB(A))
  • Equivalent Noise Level, ITU-R BS.468-4typ. 33 dB (max. 36 dB)
  • Distortion, THD < 1%134 dB SPL RMS, 137 dB SPL peak
  • Dynamic Rangetyp. 117 dB
  • Max. SPL, THD 10%153 dB SPL peak
  • Switchable Attenuator, Filters, etc.0 dB / -20 dB
  • Cable Drive Capability100 m (328 ft)
  • Output Balance PrincipleImpedance balancing with Active Drive
  • CMRR> 60 dB
  • Power Supply (for full performance)P48 (Phantom Power)
  • Current consumption2.8 mA
  • ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Weight5.8 oz
  • Dimensions0.75" x 7.8"
  • Max. Output Voltage, RMS8V
  • Sensitivity Selection Tolerance (at 1kHz)±1.5 dB

In The Box

DPA ST2011A Stereo Pair with Case

Customer Reviews