With superb audio specifications and connectivity and featuring an outstanding microphone preamp, the TASCAM SERIES 8p Dyna is a great choice for both studio and stage. Housed in a rugged 1U rack-mount casing, its dual S/MUX optical ports make it a perfect expansion unit for a TASCAM SERIES 102i or SERIES 208i or other S/MUX-equipped audio interfaces including ADAT, or use it as a stand-alone front end.
Each SERIES 8p Dyna channel also features individually switched +48V phantom power for use with condenser mics, and an easy-to-use, single-control analog compressor with true bypass.
TASCAM SERIES 8p Dyna Features
- Ideal for studio and stage
- Rugged 1U rack-mount casing
- Dual S/MUX optical ports
- Perfect expansion unit for Tascam SERIES 102i, 208i or other S/MUX-equipped audio interfaces including ADAT
- Individually switched +48V phantom power for use with condenser mics
- Easy-to-use, single-control analog compressor with true bypass
- SERIES 8p Dyna 8-channel mic preamp with analog compressor1
- AC adapter1
- Sampling Frequency44.1k / 48k / 88.2k / 96k / 176.4k / 192k Hz
- Quantization Bit Rate24-bit
- Mic In (Balanced) 1-2 (when the input switch is set to MIC/LINE), 3 thru 8
- 1-2 (when the input switch is set to MIC/LINE), 3 thru 8
- Connector: XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
- Input Impedance: 2.3kΩ
- Rated Input Level
- GAIN:MAX -58dBu(0.001Vrms)
- GAIN:MIN -6dBu(0.388Vrms)
- Max. Input Level: +10dBu (2.45Vrms)
- Gain Range: 52dB
- Instrument In (unbalanced) 1-2 (when the input switch is set to INST)
- Connector: 1/4" TS jack equivalent (Tip: HOT, Sleeve: GND)
- Input Impedance: 1MΩ or more
- Rated Input Level
- GAIN:MAX -58dBV (0.0012 Vrms)
- GAIN:MIN -6dBV (0.501Vrms)
- Max. Input Level: +10dBV (3.162Vrms)
- Gain Range: 52dB
- Line In (balanced) 1-2 (when the input switch set to MIC/LINE), 3 thru 8
- Connector: 1/4" (6.3mm) TRS jack equivalent (Tip: HOT, Ring: COLD, Sleeve: GND)
- Input Impedance: 10kΩ
- Rated Input Level
- GAIN:MAX -48dBu (0.003 Vrms)
- GAIN:MIN +4dBu (1.228Vrms)
- Max. Input Level: +24dBu (12.282Vrms)
- Gain Range: 52dB
- Analog Out (balanced)
- Connector: D-Sub 25pin, inch-screw No.4-40 UNC
- Output Impedance: 200Ω or less
- Nominal Output Level: +4dBu (1.228Vrms)
- Max. Output Level: +20dBu (7.75Vrms)
- Load Impedance: 2kΩ or more
- Line Out (balanced) LINE OUT 1 thru 8
- Connector: 1/4" (6.3mm) TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND)
- Output Impedance: 200Ω or less
- Nominal Output Level: +4dBu (1.228Vrms)
- Max. Output Level: +20dBu (7.75Vrms)
- Optical Out (S/MUX)
- Connector: OPTICAL (JEITA RC-5720C)
- Signal Format: multi-channel optical format (supports S/MUX2: 88.2k/96k Hz, S/MUX4: 176.4k/192k Hz)
- Word In
- Connector: BNC
- Input Voltage: 2.0Vpp to 5.0Vpp
- Input Impedance: 75Ω +/-10% with Terminal ON/OFF Switch
- Frequency Deviation: +/-100ppm
- Word Out
- Connector: BNC
- Output Voltage: 2.0Vpp (into 75Ω)
- Output Impedance: 75Ω +/-10% with OUT/THRU switch
- Sampling Frequency: 44.1k / 48k / 88.2k / 96k / 176.4k /192k Hz
- PowerDC 12V (dedicated AC adapter PS-P1230)
- Power Consumption16W
- Mic Amp EIN-127dBu or lower
- Frequency Response (JEITA)
- Mic/Line to Line Out
- 20Hz to 40kHz, +/-0.5dB
- 40kHz to 80kHz, +/-5dB
- Mic/Line (analog to Digital Output (S/MUX)
- Fs 44.1k/48kHz: 20Hz to 20kHz, +/-0.5dB
- Fs 88.2k/96kHz: 20Hz to 40kHz, +/-0.5dB
- Fs 176.4k/192kHz: 20Hz to 80kHz, +/-5dB
- S/N Ratio (GAIN knob at minimum, JEITA)
- MIC/LINE/INST to Line Out: 116dB
- MIC/LINE/INST (analog) to Digital Output (S/MUX)
- Fs 44.1kHz: 113dB
- Fs 48kHz: 113dB
- Fs 96kHz: 111dB
- THD
- MIC / LINE to LINE OUT: 0.0007%
- INST to LINE OUT: 0.0009%
- MIC/LINE/INST to digital output (S/MUX): 0.001%
- Crosstalk
- MIC to LINE OUT: 119dB
- MIC to Digital Output (S/MUX): 114dB
- Dimensions (WxHxD)18.98" x 1.76" x 9"
- Weight5.7 pounds