Isolated BNC chassis connector, feedthrough in nickel D-shape housing. The Neutrik NBB75DFI Isolated BNC Chassis Connector offers a true 75Ω design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing (audio industry standard).
Neutrik NBB75DFI Features
- Gold plated cage type center contact
- True 75Ω design meets HD requirements
- Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)
- Standard D-shape housing - provides flush mounting and protection from damage
- Color coding possible
- NBB75DFI isolated BNC chassis connector1
- Electrical
- Signal Type: HD, SDI, Video, AES/EBU, Composit, YUV, RGB, RGBH, RGBHV
- Contact Resistance: ≤ 3 mΩ (inner), ≤ 2 mΩ (outer)
- Dielectric Strength: 1,5 kVdc
- Impedance: 75Ω
- Insulation Resistance: > 5 GΩ
- Rated Voltage: <50 V
- VSWR
- ≤1.03/>37 dB up to 1 GHz
- ≤1.05/>32 dB up to 2 GHz
- ≤1.08/>28 dB up to 3 Ghz
- Mechanical
- Insertion Force: < 25 N
- Lifetime: > 1000 mating cycles
- Locking Device: bayonett
- Mounting Direction: front mounting
- Chassis Shape: D
- Material
- Contacts: brass (CuZn39Pb3), 0.2 µm AuCo (Center contact)
- Insert: PTFE
- Shell: polyacetal (POM) (Insulation Shell)
- Shell Plating: Optalloy®
- D-Shape Housing: zinc diecast (ZnAl4Cu1) gal Ni plating
- Temperature Range-22°F to 176°F (-30°C to 80°C)
