The Palmer PAN 02 is a standard active DI box. It can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.
Palmer PAN 02 Features
- Standard active DI box
- Can be operated with 9V batteries or 48V phantom power
- High-impedance input; higher output level than with a passive DI box
- Active circuitry allows for high input impedance and higher input sensitivity
- Maximum output impedance with phantom power operation +10 dB
- Output: transformer balanced
- "Floating ground" circuitry enables ground lift even during phantom power operation
- PAN 02 Active DI Box1
- Type active
- Channels 1
- Inputs 1
- Input connectors 6.3 mm jack
- Max. input level + 45dBu
- Input impedance (@60Hz) 1M Ohm(s)
- Input pad 0/-30dB
- Outputs 1
- THRU outputs/channel 1
- Output connectors 6.3 mm jack, XLR
- Max. output level + 10dBu
- Output impedance 600 Ohm(s)
- Frequency response 10-20000 Hz
- Transformer balanced Yes
- Ratio 1:1
- Controls attenuator, ground lift
- Operating voltage +48V phantom power, 9V block
- Power consumption 3.8 mA (9V), 4 mA (48V)
- Cabinet material sheet steel
- Cabinet surface Powder coated
- Width 110 mm
- Depth 73 mm
- Height 42 mm
- Weight 0.353 kg
