The iD14 MKII provides professional audio performance in a compact and stylish desktop package designed to upgrade your recordings to the next level in every way.
All of Audient’s iD interfaces use the Audient Console Mic Preamp, which has the same discrete circuit design as their popular recording console ASP8024-HE. The high-grade design of this preamp provides a clean and accurate capture of your source and features a noise floor 30,000 times quieter than the signal level. Two of these preamps are present in the iD14 MKII, delivering ultra-low noise and low distortion with a hint of classic analog warmth.
Converters in the iD14 MKII make sure you hear every nuance and detail of your audio. With an incredible 126dB of dynamic range, audio comes through more accurately, allowing you to make better creative decisions and enjoy stunning clarity on your desktop.
Four line outputs are available to connect and listen to mixes through two sets of speakers or connect headphones. A jack and mini jack connection along with a powerful headphone amp prepare the iD14 MKII for the most demanding recording sessions.
Built to be truly plug-and-play, the iD14 MKII has a harmonically rich JFET instrument input that recreates the input stage of a classic valve amplifier. This provides the ultimate sonic foundation for your guitar or bass and amp sims.
Digital input makes the iD14 MKII built for the future. Compatible with both ADAT and SPDIF you can add up to eight extra mic pre-inputs.
Dedicated talkback technology on the iD14 MKII lets you use any audio source connected to your computer as your talkback mic, such as a built-in or USB microphone. The flexibility of the talkback mic frees up valuable mic pres for recording.
Assign any of the advanced monitoring features to the iD button to speed up your workflow. Advanced monitoring features include Dim, Cut, Polarity Reverse, Mono Sum, Talkback, or Cue Mix monitoring.
The iD14 MKII is powered directly from your computer via USB, offering flexibility in recording anywhere you can bring your laptop.
The audio Loop-back feature helps content creators, podcasters, and streamers record the audio they need by capturing playback from applications on your computer at the same time as microphones.
The volume knob on the iD14 MKII can be turned into a virtual scroll wheel. Reconfiguring the volume knob this way helps you quickly dial in settings, adjust faders, or even write in automation faster than through the onscreen parameters.
Beyond the capabilities of the iD14 MKII, it comes with a suite of creative software including Cubase LE and Cubasis LE for iOS, and industry-leading plugins and virtual instruments.
Audient iD14 MKII Features
- 2 Audient Console Mic Pres
- Class leading converters
- JFET instrument input
- Dual headphone outputs
- Digital expansion
- USB bus powered
- 120 dB dynamic range (ADC) 126 dynamic range (DAC)
- Ultra low latency
- Mute and dim control
- Mono summing
- Phase polarity flip
- Provides phantom power over USB
- Audio loop-back
- iD14 MkII 10x6 USB2 Audio Interface1
- D.I / Instrument Input
- Range: 40dB
- Lineup: 12dBu = 0dBFS
- THD+N @ 0dBu: 0.1%
- SNR: 100dBu A-Weighted
- Frequency Response – MIN GAIN ±0.5dB 10Hz to 20kHz
- 1/4” TS Jack: Tip (Hot) & Sleeve (Shield)
- Microphone preamplifier
- Gain Range: 58dB
- Lineup: 12dBu = 0dBFS
- Mic Max Input Level: 12dBu
- Max Input Level: 21dBu
- Input Impedance (Mic): 2.8k
- Input Impedance (Line): >8k
- THD+N @ 0dBu 0.00170%
- SNR: 101dBu A-Weighted
- EIN: 129dB A-Weighted
- CMRR @ 1k: >75dB
- Crosstalk: >-100dB
- Frequency Response – MIN GAIN ±0.5dB 10Hz to 40kHz
- XLR Combi Female: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
- 1/4” TRS Jack: Tip (Hot), Ring (Cold) & Sleeve (Shield)
- Analog to Digital Converter
- THD+N @ -1dBFS: 0.001%
- Dynamic Range: 120dB A-Weighted
- CMRR: >80dB
- Frequency Response: ±0.5dB 10Hz to 40kHz
- Line Outputs (DAC)
- Lineup: 12dBu = 0dBFS
- THD+N @ -1dBFS: 0.0006%
- Dynamic Range: 125.5dB A-Weighted
- Crosstalk: >120dB
- Frequency Response: ±0.1dB 10Hz to 40kHz
- 1/4” TRS Jack: Tip (Hot), Ring (Cold) & Sleeve (Shield)
- Headphone Outputs
- Lineup: 18.5dBu = 0dBFS
- THD+N @ -1dBFS: 0.0009%
- Dynamic Range: 125.5dB A-Weighted
- Crosstalk: >116dB
- Frequency Response: ±0.25dB 10Hz to 40kHz
- Maximum Level @ 30R: 2.59V Peak, 1.827V RMS, 223mW
- Maximum Level @ 62R: 4.18V Peak, 2.95V RMS, 280mW
- Maximum Level @ 600R: 7.72V Peak, 5.46V RMS, 100mW
- 1/4” TRS Jack: Tip (Left), Ring (Right) & Sleeve (Shield)
- USB-C High Speed
- Bus Power:
- Min Requirement: 0.9A @ 5V | >=USB 3.0 Port
- Max Requirement: 1.5A @ 5V | USB-C: Provides higher headphone outputs levels
- No. of Input Channels: 10
- No. of Output Channels: 16
- DSP Mixer Latency Round Trip (in-to-out): 44.1kHz 0.65mS
- 48.0kHz | 0.6mS
- 88.2kHz | 0.33mS
- 96.0kHz | 0.31mS
- Bus Power:
