DPA 3511A d:dictate Cardioid Microphone Stereo Kit

This is a complete stereo kit with two d:dicate 4011A Cardioid Microphones, carefully factory-matched within ±1 dB on frequency response and sensitivity in the microphone’s entire frequency bandwidth.

The d:dicate 4011A Cardioid Microphone is renowned in recording studios and live applications around the world as an exceptional mic. State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion.

DPA 3511A Features

• Close-miking
• Great for high sound levels
• Factory-matched pair within ±1 dB
• Accurate sound
• Colorless sound
• Modular flexibility

• 4011A microphones2
• Spacer1
• Windscreens2
• Stereo boom1
• Shock mount2
• Holder2

• Transducer TypeCondenser
• Polar PatternCardioid
• Frequency Response20 Hz - 20 kHz
• Rated Output Impedance200 ohms
• Sensitivity, Nominal ±2 dB at 1kHz10 mV/Pa; -40 dB re. 1 V/Pa
• Equivalent Noise Level, A-WeightedTyp. 18 dB(A) re. 20 µPa (max. 20 dB(A))
• Equivalent Noise Level, ITU-R BS.468-4Typ. 25 dB (max. 27 dB)
• Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
• Dynamic RangeTyp. 121 dB
• Max. SPL, THD 10%159 dB SPL peak
• Switchable Attenuator, Filters, etc.0 dB / -20 dB
• Cable Drive Capability100 m (328 ft)
• Output Balance PrincipleImpedance balancing with Active Drive
• CMRR> 60 dB
• Power Supply (for full performance)P48 (Phantom Power)
• Current Consumption2.8 mA
• ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Colormatte black
• Weight5.6 oz
• Dimensions0.75" diameter x 6.7" length
• Max. Output Voltage, RMS8 V
• Matching Tolerance (frequency response and sensitivity)±1 dB
• Phase Deviation for Kit< 10%