null Skip to main content
Lake LM 26 2-in/6-out Processor
Lake LM 26 2-in/6-out Processor
$3,899.00

Lake LM 26 2-in/6-out Processor

(No reviews yet)
SoundPro Item: 48866
MPN: LM26U
$3,899.00
Add to Wish List

Account manager
Have a Question? Ask an Account Manager

The LM 26 provides a two input/six output analog configuration that is ideally suited for multi-way loudspeaker crossover, delay and EQ functions. The LM 26 also provides 4 × 8 AES3 digital I/O and 4 × 8 Dante networked I/O, all with comprehensive signal routing to provide Dante break-in / break-out and failover functionality. Two LM 26 units may be stacked and linked to function seamlessly as a single 4 × 12 processor.

LM 26 provides the ultimate combination of input/output signal flexibility and fail-safe operation. Audio inputs are accepted via the Dante network as well as on connectors for AES3 digital and analog. Simple programming in LAKE Controller allows multiple, user-configured automatic switching scenarios. For example, signals may be distributed over the Dante network, with an AES3 input source failing over to analog – and with the result automatically cascading to all Dante receivers. In addition, the LM Series’ dual-redundant network topology enables seamless switching in case of a problem on one Ethernet link.

In all situations, the LM 26 constantly monitors both the network and all active inputs to detect active audio signals, valid digital clocks, and valid network integrity. If problems are detected, automatic input priority switching ensures that the show will go on.

Lake LM 26 Features

  • Two input/six output analog configuration
  • Ideal for multi-way loudspeaker crossover, delay and EQ functions
  • Provides 4 × 8 AES3 digital I/O and 4 × 8 Dante networked I/O
  • LM 26 2-in/6-out Processor1
  • Module configuration2 Contour or 4 Mesa modules
  • Channel processing6 in Contour mode, 4 in Mesa mode
  • Input routers8 input routers with 4 priorities in each, seamless failover to lower priorities
  • Module input mixer4 ch. for Contour, 8 ch. for Mesa-modules. Mix any ratio between all input routers.
  • Input processingRaised Cosine Mesa and Ideal Graphic input equalizers
  • Output processingLinear phase or Classic crossovers, Parametric EQ, shelving and all-pass filters
  • FeaturesDelay, Mute, Phase, Gain etc.
  • LimitersLimiterMax with Peak and RMS limiter. Configurable MaxRMSLevel, MaxRMSCorner, MaxRMSAttack
  • SuperModule compatibleYes
  • Audio Performance
    • Conversion resolution: 24-bit
    • Internal Sample Rate / Data path: 96 kHz / 32 bit floating point
    • Product propagation delay: Best case (AES synchronous 96 kHz to AES synchronous 96 kHz via module) 0.871 ms Analog (Analog in to Analog out via module) 1.039 ms Pass thru (Analog in to AES synchronous 96 kHz bypassing module) 0.158 ms
    • Maximum available user delay: 2 seconds
  • Analog
    • Inputs and Outputs: 2 inputs, 6 outputs
    • Frequency response, digital-to-analog: +/-0.03 dB, 20 Hz to 20 kHz
    • Frequency response, analog-to-digital: +/-0.1 dB, 20 Hz to 20 kHz
    • THD+Noise, inputs: 0.00024% typical at 1 kHz
    • THD+Noise, Outputs: 0.00037% typical at 1 kHz
    • Dynamic range, inputs: 116 dB
    • Dynamic range, Outputs: 115 dB
    • Input impedance: 20 kOhm balanced, 10 kOhm unbalanced
    • Common Mode Rejection (CMR): -74 dB, 20 Hz to 20 kHz
    • Crosstalk, inputs: -98 dB, 20 Hz to 20 kHz
  • Dante Audio Network
    • Inputs and Outputs: 4 inputs, 8 outputs
    • Supported sample rates: 48, 96 kHz
    • Support redundant paths: Yes
    • Flexible topology: yes
  • Device presetsFrame presets: 100
  • AES Inputs
    • Inputs and Outputs: 4 inputs, 8 outputs
    • Supported resolutions: Up to 24-bit
    • Supported sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
    • Termination: Selectable
  • GPIO
    • Inputs: 2 General Purpose Inputs (GPI) supporting external contact closure
    • Outputs: 2 General Purpose Outputs (GPO) with internal contact closure
    • Software configurable input control: Standby state, Mute state, Dual preset recall
    • Software configurable output indication: Standby state, Mute state, Faults, Ready
  • Ethernet
    • Gigabit Ethernet: 1000 Base-T
    • Fast Ethernet: 100 Base-Tx
  • Back panel Interface
    • Analog Inputs and Outputs: 2 + 6 XLR
    • AES Inputs and Outputs: DB-25, with selectable termination
    • Ethernet Ports: Dual Neutrik® etherCON®
    • GPIO: DB-9
    • Power: Detachable locking 3-pin IEC
    • Control and monitoring interface: Via Ethernet for Lake Controller software
  • Front-panel user interface
    • Display: Daylight readable monochrome (128 x 64)
    • Meters: LED for signal level and clip indicators per channel
    • LED Fault and Warning indication: Yes
    • Parameter adjustment: Single/multiple parameter edits with rotary encoder
    • Standby Power button: On/Standby
  • Power
    • Nominal voltage: 100 – 240 VAC
    • Operating voltage: 70-265 V AC
    • Power consumption: 30 W maximum
  • Physical
    • Dimensions: 483 mm (19"), 44 mm (1 U), 290 mm (11.5")
    • Weight: 5 kg (11 lbs)
    • Finish: Black painted steel chassis with cast alumimum handles
  • ApprovalsCE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC

 

In The Box

Customer Reviews