The Cherry Picker gives you the ability to connect to multiple devices in the studio and instantly A/B between them without any time-consuming cable swapping or re-patching. Now you can test your vocal mic through four different preamps without even stopping playback. It also works with line level signals, so you can connect the output of a single mic preamp into four compressors or effects units. The Cherry Picker helps you make quick decisions with the confidence that comes from an immediate A/B comparison. When paired with the Radial Gold Digger™ you can choose between four sources and destinations and select any combination instantly, giving you the freedom to explore endless sonic possibilities.
Radial Cherry Picker Features
- Select the best mic & preamp combination
- Passive 'straight wire' color-free signal path
- Built-in 48V phantom power for condenser mics
- Improve the workflow efficiency in your studio
- Cherry Picker 4 Channel Preamp Selector1
- Three Year Warranty (transferable)1
- Audio circuit type Passive signal path with active relay switching
- Frequency response 10Hz to 40kHz
- Dynamic range >115dBu
- Gain 0.0dB – Unity gain device
- Total harmonic distortion 0.0003%
- Intermodulation Distortion 0.001%
- Phase Deviation < 0.001 degrees at all frequencies
- Input Impedance 10k Ohms
- Common Mode Rejection Ratio -97dB @55Hz
- Equivalent Input Noise -115dB
- Maximum Input +26dBu
- Maximum Output +26dBu
- Construction 14 gauge steel chassis & outer shell
- Size (LxWxD) 4.5x2x6" (121x64x147mm)
- Weight 2.8 lbs (1.3kg)
- Shipping size (LxWxD) 4.75x2.5x10.75" (121x64x273mm)
- Shipping weight 3.05 lbs (1.4kg)
- Power +15V DC/400mA power supply included
- Conditions For use in dry locations only between 5°C and 40°C
