UP 2162 is a device with 2 separated and independent 160W amplifiers, each having 2 audio inputs, of which one with priority function through a closing contact. Both the audio inputs are at ‘line’ level: for pre-amplified signals or music sources (e.g. CD players, tuners, etc.).The amplifier output is available either for low impedance loudspeakers (min. 4 O) or 100 – 70 V constant voltage line (for loudspeakers having 100 – 70 V transformers). The amplifier is Class D with switching power supply; the overall weight is extremely reduced plus it offers a wide audio bandwidth quality.
RCF UP-2162 Features
- Power Amplifier designed for the transmission of announcements and / or musical programs
- Main input on removable connector
- AUX Input for music sources removable connector
- Controls for treble, bass and Gain on the AUX Input
- Main Input can have priority over the Aux Input (by means of an external command linked to the removable connector)
- Output speaker available either for low impedance loudspeakers (min. 4 O) or 100 – 70V constant voltage line
- Front panel LEDs indicate the device state (ON, PROT), the priority activation (PRIOR) and the signal/peak level (SIG/PK)
- UP-2162 power amplifier1
- Frequency Response (-3dB)50Hz - 16,000Hz
- Distortion (THD+N) @ 1kHz nominal power<0.3%
- Input Section
- Total Number of Inputs: 4
- Balanced: 4
- Mono: 2
- Stereo: 2
- Line Inputs: 4
- Line Connectors: Euroblock
- GPI: 4
- Output Section
- Power Output Connectors: Euroblock
- Processing
- Tone Controls: yes
- Configuration and Control
- Configuration: front panel
- Priority: yes
- Protections
- Cooling: convection
- Short Circuit: yes
- Thermal: yes
- DC: yes
- Fuses: yes
- Power Requirement
- Operating Voltage: 220-240/115 V~ 50/60Hz
- Voltage Selection: internal
- Power Consumption (max): 700W
- Physical Specifications
- Cabinet / Case Material: metal
- Rack Mounting: 19", 2U
- Dimensions (HxWxD): 3.46" x 17.4" x 9.06"
- Weight: 15.92 pounds
